Fabrics are woven under tension. If the fabric is not adequately preshrunk
before the shirt is constructed, the agitation of any laundering process can
relax the fabric resulting in shrinkage. If shrinkage does not occur until the
shirt has been laundered several times, it may be due to the removal of
finishing agents such as sizing, starches, and stain repellents that held the
fabric in place. Not only do shirts shrink, but most other items do too.
Shrinkage is so common in fabrics that the American Society for Testing and
Materials (ASTM) has established standards for the amount of acceptable
shrinkage in all items. Typically shirt manufacturers allow for 2 to 3 %
shrinkage even on properly stabilized fabrics. This means a shirt with a 15
1/3-inch neck and 33-inch sleeve length could shrink approximately 1/3 to 1/2
inch in the neck and 2/3 to 1 inch in the sleeve. On fabrics that are
improperly stabilized, shrinkage is higher, resulting in a shirt that is too
small.
Most but not all stains can be completely removed by an expert stain removal
technician. Many factors determine if a stain will be removed, including the
type of stain, the fiber type and color of fabric, and the length of time the
stain has remained on the fabric.
Stains from some dyes, medicine, or ink may not be completely removed because
they contain permanent coloring matter. The most common stains are food and
beverage stains. Salad oils, other food fats, and greases oxidize over time,
leaving a tan or yellow stain. Other food and beverages contain animal proteins
(i.e., dairy products), tannins (coffee, tea), or sugars (juices, soda,
alcohol) that can similarly oxidize with age, discolor, and become permanently
set.
The good news is the chances of removing stains improve with your assistance.
The sooner you get a stain to a professional, the better the chances are of
getting it out.
Men's shirt styles are relatively static and don't change radically from year to
year. For this reason, automated equipment has been designed to press standard
shirts, which cut down on labor costs. On the other hand, there is little
consistency in women's shirts. They often contain various trims, delicate
fabrics (silk, satin), and other embellishments (ruffles, pleats, tucks) that
require hand ironing. Women's styles change from year to year and season to
season. The result is that most women's shirts have to be hand-finished
individually which is a very labor-intensive process. This additional charge
applies to any shirt that requires additional labor, be a man's or woman's
shirt.
The federal government fines manufacturers that fail to provide a reasonable
basis for the care instructions they provide. However, manufacturers are not
required to verify what is printed on a label is accurate. Unfortunately for
consumers, the Federal Trade Commission, the agency responsible for the Care
Labeling Rule, can only enforce the rule after garments have already been
ruined and a pattern of damage is detected.
In other instances, a manufacturer may add care instructions that do not comply
with the FTC care labeling Rule. These include: "Dry Clean Only, Exclusive of
Trim"; "Do Not Wash, Do Not Dry Clean, Take to a Laundry Expert", "Special
Precautions and Care to Beading. Do not wash or clean by fabric methods. Must
be cleaned by laundry expert".